Must Know Thinning Scissors Basics

The Basics of Thinning Scissors

When thinners have higher cutting ratios. they cut more hair with a single cut, reducing the cutting time. Therefore, using a higher cutting ratio thinner can be beneficial for efficiency. However. unskilled usage can ruin the hair design. so stylists should ensure their technical skills and pay careful attention while cutting. It is essential to choose the right thinner for the level of skill and purpose.

What is the cutting ratio?

It is the ratio of the number of hairs cut based on 100 strands of hair in a single cut. For example. 10 % means 10 hair strands out of 100, 30% means 30 hair strands cut out of 100, and 70% means 70 hair strands cut out of 100.

The number of teeth refers to how many teeth are in the blade.

The number of teeth can vary depending on the design and purpose. Many stylists wrongly believe that the number of teeth and the cutting ratio are the same, but that is not true. For example. 20 teeth thinners do not cut out 20% of hair, or 40 teeth thinners cut 40%. This belief comes from when the manufacturing technology for thinning scissors was still underdeveloped. However, technology has advanced astonishingly. Therefore. 30 teeth thinner can have any desired cutting ratio of 10%. 20%, or 30%. So. if you have thought that the cutting ratio is the same as the number of teeth, check the actual cutting ratio next time you purchase thinners.

Thinners with a cutting ratio under 30% do not leave vivid cutting lines.

They can be used on any part of the hair, from the roots to the ends. Thinning scissors with 20 to 30% cutting ratios are the most commonly used.

Cut with a 20 to 25% cutting ratio

Cut with a 25 to 30% cutting ratio

When the cutting ratio is over 30%, the cutting lines become more visible since it cuts more hair at once.

It increases work speed, but it is also easier to ruin the hair design. More caution is required when working with higher cutting ratio texturizers.

If the cuffing ratio is over 60%, it is not for texturizing.

The amount of haircut is more than the amount left, so it is not easy to use as a texturizer. Scissors with 60 to 70% cut ratios help create the natural shape outline of haircuts. Instead of cutting with long scissors and then using the thinning scissors to blend, stylists can make a natural-looking cut line just with one pair of over 60% cutting ratio texturizers. Using thinning scissors with the proper cutting ratio can make your work faster and easier!